rcx

rcx

rcx

Available for to upgrade your module-equipped Hitec/Futaba and JR transmitters to 2.4GHz.

Andrew Kondor of Kondor Model Products with his latest scale ARF.

The latest in Hobby Lobby's new Pilot-1 series, this 1/8 Scale Waco YKS-6 has a 50-inch wingspan, is 37 inches long has 624 sq. in. of wing area, and weighs 43 oz. ready to fly.

This Korean War legend is beautifully brought to life in a smooth handling, fast flying EDF jet. All molded EPS foam construction pre-painted and pre-decorated. Comes with landing gear and steerable nose wheel, gear is removeable if you want to hand launch and belly land. Its small size and light weight combined with a powerful drive system makes the F9F a fast flying jet. Its conventional layout gives the model great handling and predictable performance. 64mm fan, brushless motor and 25A speed controller are pre-installed. In the RTF version the 6-channel 72 mHz receiver is installed. Assembly takes less time that it takes to charge the included 3-cell 1300 mAh lipo battery. Lipo balance charger is included. Due to its small size and high speed, this model is best suited to intermediate to advanced pilots. 30-1/4" wingspan, 31-1/2" long, 179 sq. in. wing area, 18-1/2 oz. flying weight.

A-7 Crusader ARF- The 70mm fan with its outrunner motor on 4 lithium polymer cells propels the big A-7 with power and speed. Hand launches are a breeze, the airplane has an easy to grip fuselage; a firm toss and off you go. Assembly is quick as all of the tough steps have been pre-done. Tail surfaces must be glued to the fuselage and connected to the pre-installed servos; the main wing has carbon tube reinforcements and must be screwed in place on the fuselage after connecting the aileron servos to your receiver. By the time you have the included 2200mAh 4-cell battery charged, you should be ready to fly. The CG is set automatically when you install the battery in the battery compartment under the canopy. This airplane is handlaunched and lands on its belly, great for those guys that don't have a paved runway to fly from. Airplane comes pre-painted with the water slide decals pre-applied. Fan and motor unit is easily accessible through a hatch in the bottom of the fuselage. This is a 4 servos airplane, 2 for ailerons and 2 for elevators. $249.00